Daken Tape Rail is super wide, super strong and gives your fence the look if post and rail with all the benefits of an electric fence. Daken tape rail has been designed to be highly effective and easy to erect.
Using 8 heavy duty stainless steel wires for long life, this product has around 20 times less resistance than standard poly-wire and polytape products.
Daken tape rail system has a full range of matching accessories (listed below) This allows construction utilizing either steel or wood posts. If you plan on using steel post / star pickets, specially designed protective caps should be used as the top insulator to protect your valuable livestock.
If you are constructing the fence by yourself the product box can be used as a dispensing unit. Tie the box to a straining post using some wire or alternatively you can place the box on the center spindle of a common wire spinner and simply pull the wire through the slit in the box.
Post spacings should be 5 meters apart or in high wind areas the space between post should be reduced to minimize tape 'flutter'. If the tape is moving in the wind increase the strain and reduce post spacings.
Full installation instructions included with product.
- 95mm wide
- 100m length roll
- Stainless steel wire conductors - 8 x 0.50mm woven into U.V. treated polymer fibers for exceptional life in the Australian sun
- 1800 Ohms/km Resistance
- Maximum fence length of 16km (10 miles) per energizer unit
Other tape rail accessories.
EFD74471D - Tape rail steel post insulator
EFD74472D - Tape rail wood post insulator
EFD74476D - Tape rail insulated strainer
EFD72750D - Line clamp
EFD74473D - Tape rail steel post white cap insulator
EFD74473BD - Tape rail steel post black cap insulator
EFD76610D - Tape rail (jumbo) tape gate kit
EFD6552D - Heavy duty cut out switch
EFD74468D - Tape rail end clamp assembly ( for stains under 100m only)
EFD74478D - 95mm tape rail joiner- stainless steel
|
Online store
